Esim Prime guide
How to Install an eSIM Prime eSIM on iPhone and Android
If you want to know how to install eSIM Prime, the process is short on paper. You get your details by email, add the eSIM in your phone's settings, point mobile data at it, and switch on Data Roaming when you arrive. This guide follows the seller's own installation page for iPhone and Android and adds the fallback and the mistakes the refund policy says it will not cover. Read this first: the steps come from the seller's documentation. This guide's author did not run the install, and menu names vary by phone brand, so treat your device's own labels as the final word. For the product overview, see the eSIM Prime review, where the publisher's verdict is "Tried & liked".
Published November 9, 2026
Before you start: what your device and connection need
The seller says eSIM Prime works only on carrier-unlocked devices that support eSIM. Two checks come before any installation:
- The device must be eSIM-capable. The seller suggests dialling `*#06#` and looking for an EID number. It also offers a model search on its compatible devices page. Our compatible devices guide covers the known exclusions, such as Apple Watch and iPhones from mainland China, Hong Kong and Macao.
- The device must be carrier-unlocked. The seller notes that an eSIM-capable phone can still be locked to a carrier, and it must be unlocked before you buy a plan.
You also need internet during installation. The phone downloads the eSIM profile over Wi-Fi or mobile data. The seller recommends installing at home on Wi-Fi before you travel, and says installation takes about 2 minutes. That timing is the seller's figure, and we have not measured it.
Where the installation details arrive
According to the seller, the eSIM details come in an eSIM Prime email. That email contains three things:
- a QR code
- an SM-DP+ address
- an activation code
The QR code is the main route. The SM-DP+ address and activation code are the manual fallback described further down. If you cannot find the email, the seller's refund policy points installation and QR or activation-code problems to `admin@esimprime.com`, and says possible remedies include re-sending installation details. Check your spam folder first, and keep your order number to hand, because the seller's page asks for it when a code was already used or a reinstall fails.
One practical point: open the email on a different screen from the phone you are installing on, such as a laptop or tablet, so you can scan the QR code with the phone. If you only have the phone, the manual entry route below avoids the need to scan.
iPhone steps: from Activate to Done
The seller's iPhone sequence is below. Your screen wording may differ slightly between iOS versions.
iPhone installation, per the seller's page
- Scan the QR code
Use the QR code from the eSIM Prime email while connected to Wi-Fi or mobile data.
- Tap Activate
Confirm the activation when the phone asks.
- Tap Continue
The phone shows that the eSIM is ready.
- Check the phone numbers
Review the numbers shown before moving on.
- Label the eSIM
Give it a name you will recognise, for example Travel.
- Wait, then tap Done
Let the activation finish before you tap Done.
The label matters more than it looks. With a physical SIM and an eSIM both present, a clear name such as Travel makes the later data settings easier to get right.
iPhone data settings: keep calls on the main line
Installing the eSIM is not the same as using it for data. The seller's next step is in Settings > Mobile Service:
- Set Mobile Data to the eSIM.
- Keep your main line for calls and SMS.
The seller's troubleshooting list includes the wrong SIM being used for data and the phone switching back to the physical SIM, so this setting is the first place to look if the eSIM seems installed but nothing loads. The data roaming and troubleshooting guide goes through those cases.
The seller also advises turning off data roaming on your home SIM to avoid unexpected charges. Keep that separate from the eSIM line, where roaming must be on (see the arrival section).
Android steps: Add Carrier eSIM and the SIM manager
The seller's Android instructions are shorter and rely more on your phone's own menus:
- Scan the QR code. When the Add Carrier eSIM? prompt appears, tap Add.
- Open the SIM manager and check that the eSIM appears under eSIMs and is switched on.
- On arrival, turn on Data roaming for the eSIM.
The seller gives two example paths, and says menu names vary by brand:
| Phone | Seller's path |
|---|---|
| Samsung | Settings > Connections > SIM manager > Add eSIM |
| Google Pixel | Settings > Network & internet > SIMs |
Other Android brands are not covered by the seller's page as supplied. If your phone has neither menu, search the settings for "SIM" or "eSIM". Do not assume the Samsung or Pixel wording matches your handset.
Unlike the iPhone section, the seller's Android summary gives no separate mobile-data selection step. If the eSIM is on but the wrong SIM is carrying data, check the data preference in the same SIM settings.
Manual entry when the QR code cannot be scanned
The seller names manual entry of the SM-DP+ address and activation code as the fallback if the QR cannot be scanned. Typical reasons are installing on the same device that displays the email, or a damaged or low-contrast image.
- Open your phone's option to add an eSIM and choose the manual or "enter details" route if it is offered. The label differs by brand.
- Type or paste the SM-DP+ address from the email.
- Enter the activation code exactly as written.
- Continue with the same checks as the QR route: confirm the eSIM is on, label it, and set it for mobile data.
Copying and pasting from the email is safer than retyping, because long codes are easy to mistype. The seller's page lists "activation code not accepted" as a known problem. If a code was already used, or a reinstall fails, it directs you to support with your order number.
On arrival: turn the eSIM line on and Data Roaming on
Installing at home does not mean you start using data at home. The seller's wording is that you turn the line on and turn on Data Roaming when you arrive. The eSIMs connect to partner networks abroad, so Data Roaming must be on for the eSIM line.
The seller says roaming is included in the plan and carries no extra charge. That is the seller's statement, and we have not tested it. The refund policy lists "data roaming not turned on" among the cases where no refund is issued, so it is the one setting to confirm when you land.
The seller also warns that the eSIM uses partner networks and that signal may be weak in remote areas. Plan details such as data allowance, validity and network names are not shown on the pages we reviewed. See pricing by destination for what is and is not listed.
To see how much data you have used, the seller points to your phone's own settings. On iPhone, open Settings > Mobile Data. On Android, open Settings > Connections > Data usage.
One-device rule and reinstalling after deletion
Two rules from the seller's page affect how careful you should be:
- An eSIM works on one device only. It cannot be installed on a different device.
- If you delete it by accident, you can reinstall it on the same phone using the same QR code or activation code.
In practice, install on the phone you will carry abroad, not on a spare. Do not delete the eSIM to "reset" it unless you have the original email still available. If you change phones before your trip, the seller's rule means the installed eSIM cannot simply be moved. We could not find a stated way to transfer one in the material we reviewed, so ask support before buying if you might switch devices.
Common install mistakes the refund policy does not cover
All eSIM purchases are described as non-refundable and non-returnable once delivered. The seller says it may, at its sole discretion, offer a replacement or other fix for a proven technical fault that makes the eSIM unusable before any activation or data use. It also lists cases where no refund is given, and several are installation mistakes:
- Incompatible or carrier-locked device. Check this before buying, using the steps above.
- User error during installation. Follow the steps in order and do not skip the data settings.
- Data roaming not turned on. Switch it on for the eSIM line on arrival.
- Partial or full use of the data. Once you start using the plan, a refund is off the table.
EU buyers should also note that the seller says the 14-day right of withdrawal does not apply once delivery has started and the details have been provided. The refund policy explained covers these terms in full.
Frequently asked questions
How do I install eSIM Prime on an iPhone?
The seller's steps are: scan the QR code from the eSIM Prime email, tap Activate, tap Continue, check the phone numbers, label the eSIM (for example Travel), wait for activation and tap Done. Then open Settings > Mobile Service, set Mobile Data to the eSIM and keep your main line for calls and SMS.
How do I install eSIM Prime on Android?
Tap Add on the "Add Carrier eSIM?" prompt, then check in the SIM manager under eSIMs that the eSIM appears and is on. The seller gives Settings > Connections > SIM manager > Add eSIM for Samsung and Settings > Network & internet > SIMs for Google Pixel. Menu names vary by brand.
What if the QR code will not scan?
The seller names manual entry as the fallback. Enter the SM-DP+ address and activation code from the same eSIM Prime email. If the code is not accepted or was already used, the seller directs you to support with your order number.
Do I need internet to install the eSIM?
Yes. The phone needs Wi-Fi or mobile data to download the eSIM profile. The seller recommends installing at home on Wi-Fi before you travel.
When should I turn on Data Roaming?
The seller says to turn the eSIM line on and turn on Data Roaming on arrival, because the eSIM connects to partner networks abroad. It says roaming is included in the plan at no extra charge, but that is the seller's claim and we have not tested it. The seller also advises turning off data roaming on your home SIM.
Can I move my eSIM to another phone?
No. The seller says an eSIM works on one device only. If you delete it, you can reinstall it on the same phone with the same QR code or activation code, but not on a different device.
Will I get a refund if I make an installation mistake?
According to the seller's refund policy, no. Refunds are not issued for user error during installation, data roaming not turned on, carrier-locked or incompatible devices, or partial or full use of the data. A replacement may be offered at the seller's sole discretion for a proven technical fault before any activation or data use.